123.hp.com/oj3830 Install
HP Officejet 3830 Wireless Printer Setup and Install

Your HP OfficeJet is present with an Input & Output Tray for handling up to 60 and 25 Sheets respectively. In order to ease out your everyday Copy, Scan & Fax task now you get a Document Feeder Tray for loading up to 35 sheets. Make use of the pair of Paper Width sliding adjustors to keep the print media firm.Download driver from 123.hp.com/setup 3830.

OJ 3830 Setup

Your Printer along with its accessories can be easily setup right from its container box. Your All-in-One Setup can now function on a versatile basis and then Copy, Scan and Fax all from one unique device. Now you can reduce in the Office Space consumption and further cut down on IT Infrastructure cost.Download driver from 123.hp.com/setup 3830.

OJ 3830 Setup

OfficeJet Scan Setup is pre-built with most of the essential scan settings for instantly scanning documents without using printer software. Make use of the USB printer cable to connect the scanner to your computer for speedy Copy, Scan and Fax operations. Ensure to place the originals over the scanner glass using the marked engraved lines and get the entire document scanned.

OJ 3830 Setup

HP wired printer setup Windows

Setting up your HP Officejet 3830 printer is an easy task. Ensure that you switch off the wireless connection before setting up wired connection. You need to have a router to connect and pick the appropriate wire for the connection. Connect one end of the wire to the LAN port in your router and connect the other end to the port that is available in the printer. Follow the instructions displayed on screen to setup the connection.

How to change from an Ethernet connection to a wireless connection(Windows)?

  • Remove the Ethernet plug from your HP officejet pro printer.
  • After proper installation, open the HP printer software.
  • You will have to run the wireless setup wizard to make the wirelessconnection up and working.

How to change from a USB connection to a wireless connection (Windows)?

  • Perform any one of the following depending on the operating system youuse.
  • Windows 8: Start – – > All Apps – – > Printer Name – – > Utilities.
  • Windows 7, Windows Vista and Windows XP: Start – – > AllPrograms – – > HP – – >HP Officejet 3830.
  • Choose Printer Setup and Software.
  • Now, select Convert a USB connected printer to wireless.
  • Follow the on screen prompts.
OJ 3830 Setup

HP wired printer setup Mac

How to change from an Ethernet connection to a wireless connection (OS X)?

  • Connect your HP printer to a wireless network.
  • On the Applications/Hewlett-Packard/Device utilities, tap on HP SetupAssistant optionto change the software connection to wireless to yourprinter.

How to change from a USB connection to a wireless network (OS X)?

  • Connect your HP printer to a wireless network.
  • Go to Applications/Hewlett-Packard/Device Utilities and then tap on HPSetup Assistant.
  • Now, change the connection to wireless for your printer.

TEST THE WIRELESS CONNECTION

The wireless test you are conducting will provide information on printer status,

MAC address and IP address.

How to print the wireless test report?

  • Tap on Wireless option from the printer’s control panel.
  • Select Settings.
  • From the list of options available, choose Print Reports.
  • Click on Print Wireless Test Report.
  • Download driver from 123.hp.com/setup 3830
OJ 3830 Setup
OJ 3830 Setup

123 HP OJ3830 MAC Setup

Users can also print a Wireless Quick Start Guide to connect your printer wirelessly.

How to print a wireless quick start guide?

Press the Information button and hold it for at least 3 seconds. Now, the start guide page will be printed which will help you connect the printer wirelessly.

How to set up the wireless connection using the HP printer software?

If you are yet to install your HP printer, use the CD that came in with the printer to install it and follow the steps below.

OS X: On the software CD, double-click on HP Installer option and perform the following tasks.

  • Open the Hewlett Packard folder and double click on the HP Utility icon located in the Applications folder.
  • Select Setup New Device from the Devices menu and then follow the on-screen instructions.
  • After your printer is successfully connected to the wireless network, the blue light on your printer blinks and then remains switched on.

How to change from an Ethernet connection to a wireless connection (OS X)?

  • Connect your HP printer to the wireless network.
  • Go to the Applications/Hewlett Packard/ Device Utilities folder and change the connection to wireless using the HP Setup Assistant option.

How to change from a USB connection to a wireless network (OS X)?

  • Switch on the wireless network and then connect your network to it.
  • Open the Applications/Hewlett-Packard/Device Utilities folder and then make use of HP Setup Assistant to change the connection from USB to wireless.

How to change from a wireless connection to a USB or Ethernet connection (OS X)?

  • Firstly, add your HP printer to the print queue.
  • Now, click and open System Preferences.
OJ 3830 Setup